Are You Responsible For A Double Glazing Lock Repairs Budget? 10 Ways To Waste Your Money

· 6 min read
Are You Responsible For A Double Glazing Lock Repairs Budget? 10 Ways To Waste Your Money

Double Glazing Lock Repairs

A good quality lock on your windows and doors can stop burglars from getting into your home. Generally, they don't like breaking glass or trying to wiggle through windows that are not closed.

Certain double glazing owners however, have had issues with their door or window lock following the installation. Luckily, these problems are usually fixable and don't require to buy new double glazing.

Broken or Faulty Locks

A locksmith can repair your uPVC window or door lock if it's damaged or is not working properly. They can repair hinges, striker plates and locks for your double-glazing. They can also reposition the cylinder to fix any misalignment which could cause your handle to work properly.

If the key fits into the lock but it won't turn or is difficult to insert, then the mechanism may be seized up. This can be caused by dirt or grime accumulating in the mechanism. If this is the case, it might be possible to clean the lock and then lubricate. Use a dry lubricant like graphite or teflon and not oil, as oil can attract dirt, and cause it to stick to the mechanism's inside. After lubricating the lock, you must insert the key and try to turn it. The lubricant must work its way into the mechanism and the lock should spin smoothly.

The loose screws inside the lock mechanism are another reason for a malfunctioning lock. They can become loose and fall out, or even break off completely preventing the lock to perform as it should. A screwdriver is a tool to tighten the screws but it is important not to over-tighten them because this could cause damage to internal components.

A damaged lock could be dangerous for both you and your family, especially if you have young children. It is possible for them to open the door without you knowing, and this can allow them access to your home. If you're worried about this happening, a licensed locksmith can offer fast and efficient assistance to secure your double-glazed doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing, who can repair any type of defective and damaged mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also modify the locking mechanism on your uPVC windows or double glazing to meet your needs. This means that replacement windows and doors are not always required.

Handles that are broken or damaged

Many double-glazed windows have a multi-point lock as a part of the overall security package. This is a great option for those who are concerned about potential burglars trying to gain entry into their home. It is also a good idea to ask your locksmith about anti-lift blocks that can be installed with the locks that are already in place to help keep your window firmly secured in its closed position.

Handle locks can be damaged or fail. They are the first component that a criminal will use to force open your window. Fortunately, the good news is that this is one of the most straightforward parts to repair.

Modern uPVC handles as well as aluminium handles are equipped with a multi-point locking mechanism known as Espagnolette that is designed to prevent forced entry. This security upgrade is often provided as an additional option on new uPVC window installations. Older style uPVC and aluminium handles can be upgraded to shoot bolt locking systems also as an optional extra on new double glazed windows.

It is crucial to fix the handle as soon as possible after it has been damaged. Handles that are damaged can prevent the window from closing correctly and letting in a draft. It could also be a weak point that burglars who are opportunistic could exploit, putting your belongings and family at risk of being taken.

To repair the broken mechanism, you first need to gain access to the window frame and remove the broken handle. The gearbox that opens the handle is located and the model is identified so a replacement can be sourced which matches the profile of internal window frame mechanism.

After the mechanism has been replaced the handle can be re-attached using the original screws - however, we generally recommend replacing them with more long screws as this will give an even more secure fit. The final step is to seal the handle using a clear sealant. This will shield it from further corrosion. After that your window will be functional again, and at only a fraction of the cost of replacing the entire window.

Hinges that are broken or faulty

If your windows don't close properly, you could suffer from draughts or the weakening of your home's security barrier and a higher risk of damp or water damage. Broken or faulty window hinges are a typical issue and can be repaired easily.

If you have a uPVC windows that isn't able to open or close and close, it's likely that your hinges are broken or damaged and need to be replaced. A lot of window manufacturers will require that you purchase an entirely new window unit in order to address this issue, but we can replace the hinges and save you money.

Window hinges are usually damaged by repeated use, or weakened over time by corrosion. If you find a broken hinge, it is important to take precautions to avoid further damage by being careful not to force the window open or closed.


You can locate the appropriate parts for your hinge by identifying its model. Maco, Mila and Roto are all window hinges. It is recommended to speak with an expert in this regard to avoid the mistake of purchasing parts that aren't compatible with your current hardware and cause further damage.

A damaged hinge can be a big issue for your uPVC windows and doors. They can be an important source of noise, and they can also permit water to get into your windows.

Verify whether the pin barrels on both hinge halves are aligned. If it isn't, tap the head pin using an hammer to create a small bend in the hinge barrel. This will keep the pin in place. A friend can help you hold the doors as you take off hinge screws and hinges. Replace the hinges and then install screws using glue. Finally, while the glue is drying, put a secure hold on the hinges using weights or clamps.

Once the hinges have been fixed after which you will be able to install the door and attach the handle. Replace the screws with wood dowels of the same size as the original screw to ensure that they match.

Glass that is broken or is damaged

uPVC Windows can become damaged in time, despite the fact they are extremely effective in keeping out the cold and retaining heat. This could include damaged or broken glass and damaged locks. This is a problem that could be extremely costly when not addressed. It can also detract from the aesthetics of your home and may lead to a loss of insulation, so it's important to repair any damage as quickly as possible.

You can repair your cracked glass by yourself if you have the proper tools and techniques. First, make sure the area around the glass is free of debris to ensure that any shards do not cause injury to anyone or are an accident hazard. Next, remove any broken pieces and dispose of them properly. Apply masking tape over the entire area.  double glazing repair near me  will stop shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a double-pane window it's a good idea to prepare the glass before gluing it back into place so that you know you'll have enough space complete the task.

Before applying the glue, clean the surface of the damaged frame and the glass with a an unclean, dry cloth. Follow the directions for application and curing which may differ from one product to the next. You may need to clamp the cracked glass using clamps that are lightweight and designed to hold fragile materials, depending on the angle.

Once the adhesive is fully set, carefully place the glass in the window frame, making sure that it is flush with the edge of the frame, and there aren't any gaps between the glass and the window sash. Avoid flexing the glass as you put it back in place, as this could weaken the seal. This can lead to water infiltration or condensation.

Get in touch with a professional glazier, like O'Brien(r) to arrange a replacement if your glass window is completely shattered. It's essential to act swiftly when you notice broken glass.